SANDBLASTING

HOME

[ Main Page ]  [ 2 ]   [ 3 ]  [ 4 ]   [ 5 ]   [ 6 ]   [ 7 ]   [ 8 ]   [ 9 ]


Here are the "dental" tools. Seam sealer and seam cleaner outers.


I put a no. 2 pencil in there for size. Oh, by the way, that's the pillow case I "stole".


The tool on the bottom is ground like a wedge at a slight angle, this baby will get after that seam sealer. The other tools are made from the no.9 wire. They are pretty small on the tips, to get under the edge of the floor support seams.


This is the sand I use, about $6 for a hundred pounds.


The seam tool in action! If you look closely at the lower part of the picture, you will see a little dark area on that seam. That's what I'm going after. I will do some scraping in there and re-sandblast it. Although when I first sandblasted it, I did it at an angle to get in there and it still didn't get it.

[ Main Page ]  [ 2 ]   [ 3 ]  [ 4 ]   [ 5 ]   [ 6 ]   [ 7 ]   [ 8 ]   [ 9 ]

HOME